Length: 505±2mmWidth: 455±2mmHeight: 238±2mm

≤31.5kg (without antenna)

Omnidirectional or directional jamming antennas should be equipped.

Able to position the drone and the remote control (pilot) in a single station by message decoding.With the drone detection and positioning function, it should be able to display the operating frequency (accurate to 0.5MHz), brand model, electronic fingerprint ID (serial number), orientation, distance, longitude and latitude (accurate to 6 decimal places), flight altitude, flight speed and other information of the drone.And can display the invasion angle, waterfall curve, logo and flight trajectory on the electronic map.With the remote control (pilot) detection and positioning function, it should be able to display the longitude and latitude of the remote control (the value is accurate to 6 decimal places), distance, orientation and other information, and can display the identification icon on the electronic map.

Able to positioning DJI (Mavic 2, Mavic 3, Mavic Mini, Mavic Pro, Mavic Air 2, Avata, FPV, Air 3, Mini3, M300, Phantom 3, Phantom 4 etc.), Autel, Parrot and other brands.

Able to detect wireless signals within the frequency range of 25MHz ~ 6000MHz, and the detection frequency band can be set.Instantaneous detection bandwidth ≥ 60MHz

Under the environmental conditions of no obvious rain/snow/fog, no obvious shelter, and no obvious electromagnetic interference, the detection and positioning distance ≥16km

Horizontal: 360°
Pitching: -90°～+90°

Under the environmental conditions of no obvious rain/snow/fog, no obvious shelter, and no obvious electromagnetic interference, the detection of direction finding error ≤ 1°(RMS)

Under the environmental conditions of no obvious rain/snow/fog, no obvious shelter, and no obvious electromagnetic interference, the detection of drone positioning error ≤ 8.5m.
Under the environmental conditions of no obvious rain/snow/fog, no obvious shelter, and no obvious electromagnetic interference, the detection of drone height-measuring error ≤ 1m.
Under the environmental conditions of no obvious rain/snow/fog, no obvious shelter, and no obvious electromagnetic interference, the detection of pilot the coordinate of latitude and longitude error ≤ 5 m.

Able to detect and locate the drone with flight speed ≥21m/s, and display the trajectory of the drone on the electronic map in real time.

Under the environmental conditions of no obvious rain/snow/fog, no obvious shelter, and no obvious electromagnetic interference, the detection success rate ≥ 99% (Number of success probes/total*100%)

Under the environmental conditions of no obvious shelter, and no obvious electromagnetic interference in 24 hours, the false rate ≤ 1 drone.

Able to detect, identify, and recognize drones with same brand, model and frequency, and able to identify the electronic fingerprint ID of each drone.

Within a certain period of time, when the device detects and identifies the same drone intrusion multiple times, it will be automatically fused into a single piece of information.
For multiple intrusions of the same drone identified, the device will be automatically integrate the intrusion information of the drone, and the electronic fingerprint ID of the drone in multiple records should be the same.

Drones ≥65 (Simultaneous, among them, the types of non-DJI brand drones should be ≥30).
Pilots (non-DJI brand) ≥10.

Number of drone trajectories ≥ 12 drones (Simultaneous).
Number of pilot trajectories ≥ 11 pilots (Simultaneous).

Able to track and locate frequency-hopping drones.
After the drone switches the working frequency band, the device should identify it as the same drone and mark it on the electronic map.
≥10 drones (Simultaneous).

It has an automatic north-pointing function, which can display the orientation angle of the sample, and the error of the north-pointing angle should be less than 3°.

After networking with other detection equipment, the drone can be detected and located by AOA or TDOA.

≥365 Days

Forcing the drone to land or return by jamming the transmission link, control link, and navigation signal (the drone needs to support the force landing or return function).
Covered FPV drones, DIY drones, Fixed-wing drones.

Support to precise jam the selected drone and force it to return.
Should not affect the other drones with the same model, working frequency band, and orientation.

The output power of each port should meet the following requirements:
1st Channel: (47±2) dBm
2nd Channel: (47±2) dBm
3rd Channel: (50±2) dBm
4th Channel: (49±2) dBm
5th Channel: (49±2) dBm

Under the environmental conditions of no obvious rain/snow/fog, no obvious shelter, and no obvious electromagnetic interference, the jamming distance ≥4 km.

Drones ≥30 (Simultaneous, among them, the types of non-DJI brand drones should be ≥25).
Frequency-Hopping Drones ≥10 (Simultaneous).

Fixed power and power bank.
Proper functioning under AC100V～240V.

Detection state, the power consumption ≤ 130W (AC 220V power supply).
Full-band jamming ≤ 1200W (AC 220V power supply).

≥24h, fixed power supply.

GB/T 17626.2, level 3
Contact Discharge: ±6kV;
Air Discharge: ±2kV, ±4kV, ±8kV;
During the test, the tested sample should not be damaged, malfunctioned, or changed in state, and the equipment should work normally after the test.

GB/T 17626.3, level 3
Sweep frequency: 80MHz ~ 1000MHz
Field strength: 10V/m
Amplitude modulation: 1kHz, modulation depth 80%
During the test, the tested sample should not be damaged, malfunctioned, or changed in state, and the equipment should work properly after the test.

Comply with GB8702-2014 Electromagnetic Environmental Control Limits
0.5m away from the front, back, left, and right of the sample, should meet:
When the transmitting frequency ranges from 30MHz to 3000MHz, the square mean root value of the environmental electric field intensity should be less than 12 V/m.
When the emission frequency ranges from 3000MHz to 6000MHz, the square mean root value of the environmental electric field intensity should be ≤ 0.22f1/2V /m.

Adapter power supply:
70℃, 4h, proper functioning.

Adapter power supply:
-40℃, 4h, proper functioning.

Forcing the drone to land or return by jamming the transmission link, control link, and navigation signal.
Covered FPV drones, DIY drones, Fixed-wing drones.